Sign rains now For the two -wheel hard rainy or fall gently. Who would not want that to happen during the trip. In addition to the risk of a cold, wet . Driving in poor visibility, rain to cause an accident as well.
"Rain is something we can not control. But what we can prepare before driving each time, it is the body and the motorcycle " is composed of technical experts think BP - Castrol ( UK ) Ltd., reveals how ( not) to prepare . Motorcycle and Car Care (Including the lives of everyone on the road) in the rainy season simply by itself to increase the security of travel and everyday use . From the forthcoming Check the troubleshooting steps that may occur as follows .
Lubricator
Condition of the problem
- The oil level is correct
- Oil dirty / worn
- Oil change is opaque (water contamination in the oil) .
- The oil level drops very quickly.
Solution
- Check the oil level / adjusted correctly.
- Check lifetime . Color and condition of the oil / change .
- Check for leaks or determine the cause of the problem and fix the leak . The engine wash and oil change
- Check for leaks / edit or loose engine cases . The technician to fix the engine
Brakes
Condition of the problem
- Brake slip ( no brakes ) .
- Hold the brake (brake not returned) .
- The free breakfast is incorrect.
- Noisy brakes ( ABS ) .
- Brake dirt / discoloration.
Solution
- Check the wear of brake pads and brake discs / editing .
Or (if necessary)
- New brake bleeder (If the brake disc brakes ) .
- Check the brake Spring Break and mechanisms
Break / fix or replace if necessary.
- Check / adjust the setting.
- Inspect brake Brake disc or drum / Polishing do.
Clean, repair or replace (if not essential) .
- New Brakes Oil Change
rubber
Condition of the problem
- Tire wear / tire is low or uneven wear .
- Tire pressure is not correct. ( Soft or hard )
Solution
- Check / Change
- Check and correct tire pressure
Air Filter
Condition of the problem
- Dirty / clogged / wet .
- Wear / tear or rot .
Solution
- Inspection / replacement or cleaning.
(Only the filter is not part of the coating .
The need for cleaning chemicals .
Dirty or clogged, replace ) .
- Check and replace
Spark plugs and spark plug
Condition of the problem
- Spark plug dirty / Misfiring
- Spark tooth spacing is incorrect.
- Spark deterioration / damage (insulation .
Tooth decay leak stains compression fracture ) .
- Spark Plug dead ( shell.
Canker decisive rubber insulation High Power Leak)
Solution
- Check / clean
- Check / adjust them properly.
- Check the ignition, external inspection / replacement (if necessary).
- Check / Change
Lighting and light
Condition of the problem
- A power failure / not working.
- Switch control circuit damaged / rust problems. Defective contacts
Solution
- Check the circuit / inspection equipment .
- Check for working / cleaning spray, moisture or replacement (if necessary).
Also, prepare the other side , such as a helmet with mask, put together a full-fledged rain. Dirt and splashing , rainwear should be attached to the storage space under the seat of the car and the rider and the pillion to prevent rain , mud and debris that may splash hit . Clothes are not sloppy , gloves to protect hands clasped hands slippery in the rain. Increase the safety of the vehicle . The plate and important documents if rain or loss should not be relaxed. To be dealt with immediately
ไม่มีความคิดเห็น:
แสดงความคิดเห็น