How ( not) to Two- wheel drive , safe in the rain.

How ( not) to Two- wheel drive , safe in the rain.

       Sign rains now For the two -wheel hard rainy or fall gently. Who would not want that to happen during the trip. In addition to the risk of a cold, wet . Driving in poor visibility, rain to cause an accident as well.
       "Rain is something we can not control. But what we can prepare before driving each time, it is the body and the motorcycle " is composed of technical experts think BP - Castrol ( UK ) Ltd., reveals how ( not) to prepare . Motorcycle and Car Care (Including the lives of everyone on the road) in the rainy season simply by itself to increase the security of travel and everyday use . From the forthcoming Check the troubleshooting steps that may occur as follows .
Lubricator
Condition of the problem
- The oil level is correct
- Oil dirty / worn
- Oil change is opaque (water contamination in the oil) .
- The oil level drops very quickly.
Solution
- Check the oil level / adjusted correctly.
- Check lifetime . Color and condition of the oil / change .
- Check for leaks or determine the cause of the problem and fix the leak . The engine wash and oil change
- Check for leaks / edit or loose engine cases . The technician to fix the engine
Brakes
Condition of the problem
- Brake slip ( no brakes ) .
- Hold the brake (brake not returned) .
- The free breakfast is incorrect.
- Noisy brakes ( ABS ) .
- Brake dirt / discoloration.
Solution
- Check the wear of brake pads and brake discs / editing .
Or (if necessary)
- New brake bleeder (If the brake disc brakes ) .
- Check the brake Spring Break and mechanisms
Break / fix or replace if necessary.
- Check / adjust the setting.
- Inspect brake Brake disc or drum / Polishing do.
Clean, repair or replace (if not essential) .
- New Brakes Oil Change
rubber
Condition of the problem
- Tire wear / tire is low or uneven wear .
- Tire pressure is not correct. ( Soft or hard )
Solution
- Check / Change
- Check and correct tire pressure
Air Filter
Condition of the problem
- Dirty / clogged / wet .
- Wear / tear or rot .
Solution
- Inspection / replacement or cleaning.
(Only the filter is not part of the coating .
The need for cleaning chemicals .
Dirty or clogged, replace ) .
- Check and replace
Spark plugs and spark plug
Condition of the problem
- Spark plug dirty / Misfiring
- Spark tooth spacing is incorrect.
- Spark deterioration / damage (insulation .
Tooth decay leak stains compression fracture ) .
- Spark Plug dead ( shell.
Canker decisive rubber insulation High Power Leak)
Solution
- Check / clean
- Check / adjust them properly.
- Check the ignition, external inspection / replacement (if necessary).
- Check / Change
Lighting and light
Condition of the problem
- A power failure / not working.
- Switch control circuit damaged / rust problems. Defective contacts
Solution
- Check the circuit / inspection equipment .
- Check for working / cleaning spray, moisture or replacement (if necessary).
         Also, prepare the other side , such as a helmet with mask, put together a full-fledged rain. Dirt and splashing , rainwear should be attached to the storage space under the seat of the car and the rider and the pillion to prevent rain , mud and debris that may splash hit . Clothes are not sloppy , gloves to protect hands clasped hands slippery in the rain. Increase the safety of the vehicle . The plate and important documents if rain or loss should not be relaxed. To be dealt with immediately

Riding boots are cool motorcycle safety.

Riding boots are cool motorcycle safety.
       It is well known that the motorcycle is a vehicle that Thailand used the most. It's convenient to use and . Starting at a high They cost more than the car lot. However, because a motorcycle is a vehicle body can not protect us all the same car . Those riders who must seek equipment that improves safety for himself  Today, we have come to know. Boots for motorcycle riding The shoes are designed to facilitate and enhance safety for the user bike . So try to see what kind of shoes for riding a motorcycle with it better.

Racing shoes

Types of motorcycle boots
           Size , there are many types of motorcycle Why shoes are divided into several categories, some are not. The shoes were designed for each of the different out below.
Racing shoes
           Motorcycle boots are designed for use in competition and driving on the road. Some general design similar to sneakers . The highlight of this shoe type The ankle -length boots ranging from ankle to shin . Durable focused on protecting the foot The shoes are made out of a combination of a single fabric, leather , plastic and steel most popular hard plastic plate at the base of the toe and the toe. The shift easier. There are rubber feet on the outside. Prevention foot while cornering
Motocross boots
           These shoes are designed to go off-road driving by it. Highlights of Motocross Boots are obvious . Will be closed longer than shoes Racing on protection from leg to leg . Is closed from the ankle strap to the top . The material has many kinds of fabric , leather, wood , plastic and metal and it has a thick plastic sheet or on the soles and toes . To prevent dirt and rocks that might bounce off the front wheel of a motorcycle .

Racing shoes

Leather shoes for riding
           The shoes are designed in full in a matter of aesthetics and performance driving . The model is made of black leather and brown. The length of the shoe from ankle to knee. To protect the legs from the heat of the exhaust system and engine. Hardened mounted inside the toe and heel. This allows for easier gear changes there is also the option of a tie and a belt strapped ankle . Furthermore , it is also beautiful. Walking into the comfort of a leather shoe general.
          I see that Shoes for riding a motorcycle , there are a variety of types . Each sector has features to suit different applications out . The style preferences of each is not the same. But I hope that what we get is the above guidelines. Would allow riders who buy shoes online, the easier it ...

Tips on How to Choose a Helmet for parents .

Tips on How to Choose a Helmet for parents .

Safety as a rider and pillion motorcycle . Buying a helmet at all times. Should I buy a helmet with the TIS . The suggested 10 reasons.
        1. A helmet that protects the head and face was the best helmet full of leaves . Followed by the open page .
        2. The helmet should have jalousie can be done. And should therefore be clear at night. And dark in the daytime
        3. Check the thickness of the shell . Should not be less than 4 mm are bright and reflective . The other riders were easily seen . Especially in the evening And does not protrude from the outer surface of the helmet more than 5 mm .

       4. to determine the hardness and thickness of the foam, which should have a depth of 2.5 cm or more rigid foam finger pressed down.
       5. Use a foam hand groping the front of his helmet . If there is more boring than 1 cm or more should not be used . Due to the weakness of the cap area. It has been harmful to the head on accident.
      6. Check the installation of chin strap. And the type of metal to metal together.

      7. Make sure the chin strap fastened . And select a semicircular two pieces together , or between metal to metal . Should avoid any kind of plastic . Due easily damaged
      8. Always wear a helmet before buying . Do not use the cap loose or too tight.
      9. If an accident And helmets to shock it. Will need to buy a new hat now. Do not reuse
     10. Do not hang the helmet near the fuel tank . The vapors of oil will cause the foam to deteriorate faster.

9. How to buy a helmet. What to see

9. How to buy a helmet. What to see
       Helmet is a very important as we ride a motorbike. Whether it 's protection or even to enter the fashion and tastes of the driver we will introduce how to choose a helmet correctly together.

       You should understand the function of the helmet before that helmet is one of the four main components of it.
• 1. Shell (Shell) will freeze and absorb shock well .
• 2. Which of the helmet to make a lot of EPS (Styrofoam) to prevent shocks caused by the light.
• 3. Make sure the chin strap can be used as well . And the chin strap is tight
• 4. good hat to wear tight- fitting and comfortable head . Good ventilation is not damp.
This time we had to do that before we bought the helmet should see it.
1. Manufactured in accordance with international standards
      Choose a helmet that made ​​certification of international standards and internationally . The rule criteria of wearing that hat . Do not choose a helmet without standards , whether justified or otherwise. It can protect your safety when it happens unexpectedly , of course, your brain will be affected seriously  Products that are not standard to fool consumers with stickers standards , but it really is not. Those goods it does not protect anything if you want to use it .
Agencies that support both foreign and domestic , such as TIS ., DOT, ECE, Snell, Bsi, etc , these organizations will take control of standard helmet use for motorcycle . If it is not standard What you will see , that is. Your brain is destroyed When you are falling and you hit the ground. You 'll choose between a good helmet leaves your life .
2. Using
      Choose your favorite style Whether the cap half or even three-quarters of a full application . Some drivers may prefer the look of the helmet, not the same. You can catch one calibration that. The guys will like my hat styles . However, compared to the application , you will know immediately that it should be as if you have to go where the wind is strong You should choose a hat full-fledged manner . You select a card , it may be sand or wind into your eyes. Keep your eye inflammation , or worst, it could make you suffer an accident. If you like open space , you just need to choose the hat is just half that. Drivers Drivers are now often choose a hat that resembles the assembly and that. Important only to full-fledged This observation is generally seen on the streets . The half helmet is often found as well, but not often, because it can not protect anything. As full-fledged hat
3. Side
        Choose the right model To wear and feel comfortable Bypass cap is not clean, it will all be blamed on the face and head. It may bring dirt into it. The key is when you need to tighten shook his head back and forth to feel the helmet does not move and do not move the way that you have to ask the seller before buying the exact size of the hat . A good sales person will always come with good instructions . Because what you paid You must have something worthwhile . More importantly, you should replace a helmet every 5 years if it had not gone before.
4. Damaged and defective
        Replace your helmet when it cracks . You will notice that the components inside your helmet has a foam called Styrofoam if your helmet cracked. When you suffer Accident access will impact your head blows up because the outer material is broken . It will impact us through the foam, and it's head faster by a helmet. Absorb less so Treatment is when you do not use any helmet. You should be stored to be . The priority should be placed on the ground for fall protection because the cap if it is damaged , you may have to buy a new one , which is expensive.
5. The line of sight
       Visibility is excellent When you buy a helmet , what do you consider is the vision to see. If you do not clear the road while driving. I think it is bad for you. Choose any style hat with common standards . No dents distorted The material is not broken Straps are being overcome And very important to cover your windows . You must choose a mirror that looks too dark . It should have light from the sun. So you try to wear it, Before you decide to buy it.
6. Breathable
      Check the vent in the cap for good. Ventilation affect the cleanliness of the helmet . It is very important in terms of cleanliness and if you leave your hat is really dirty . It is dirty, just inside your hat . It will make those nasty slap on the face and nostrils of the other . Ventilation of the helmet is often caused by surgical supplies (EPS) , which you have to ask the seller and see what the experts . This cap is clean enough to stay on your head or not.
7. Remove the Inside Out
        Choose a hat with detachable lining out. And cleaned it out !! It makes it possible to extend the lifetime of a hat. Cleanliness is important If you clean Face and your hair is light. The driving time would be dust and sweat and it is accumulated build up of dirt and odors .
8. Communication
        This may not be necessary , but if available should be selected. Some riders like to talk and listen to music while riding his motorcycle. Which Hats are some models that have collected these technologies into the case. Which is very comfortable for the rider . If you missed it , life is not like that . Should you buy a hat that looks just like that .
9. helmets for sale
        This international focus too much on goalie equipment. If not necessary , do not buy a used helmet . Remember me advice about a hat with a damaged or broken caps . Of course, it was used as a hat . You Do not Know Why those hats to sell to you. You never know how much Hat is in part to blame . Drop a few times Paint or Used for or These are questions you need to realize it too. Because it affects your life, so choose it !!

Eliminate musty smell in the helmet.

Eliminate musty smell in the helmet.
       Believe that motorcycle riders , many of you have met with the musty smell of sweat and moisture . The weather in Thailand during the daytime heat, cold, rain may cause the helmet of the odors to be. I inhaled the smell would not be who I know very well that it suffered a nose around . Try to follow the way below that.

Eliminate musty smell in the helmet.

How to clean a helmet
- In some versions of the helmet is removable lining inside out or upholstery cleaning. Remove contact lenses, wash with baby shampoo . Rinse well and dry thoroughly . If a helmet with removable lining out. The upturned hat or sun light for 2-3 hours and then aerate it should not be exposed to the sun will cause the foam to deteriorate.
- External use a soft cloth dipped in soapy water to clean the dust and dirt . And use a dry cloth to clean the last time.
- Jalousie use mild soap and water . Rinse thoroughly and wipe clean with a soft cloth .
Current products are spray cleaners and odor inside the helmet. But expensive Who wants to use natural methods I myself would not mind.
        Know ! Usually, the helmet should last for approximately 3 years for replacement because the plastic may deteriorate. And does not impact the foam head hat had been knocked out , then life will be reduced as well.

Ecotourism

Ecotourism

          Ecotourism and Eco-Tourism that. By definition , it is Tourism development to a thrift shop natural capital to be sustainable
and will ultimately have to pay back to society. This means that local authorities have the opportunity to begin to recognize
the cutting process to consider both the natural capital and social capital . As a result, the economic capital to survive.
         Ecotourism is a concept that occurs due to two trends converge is complete . Outlook on conservation and on the
changing trends of the tourism industry . The essence of the conservative trends . Caused by the increase.
And economic recession in many countries. Development activities such asThe deforestation Mining And
agriculture occur within the general area . The most severe impact on the ecosystem. And the degradation
of natural resources And consequences of economic development is not sustainable . Countries have made ​​efforts
to integrate conservation with economic development.
        The tour is likely to Appeared over the years . Humans have changed the way we use the free time to travel.
It is likely that you want to Aboriginal involvement and contact with nature. They also want to learn about places to visit ,
from ecology to plant species . Animals that are rare or endangered species. And issues such as conservation .
The loss of forest resources Poaching , wildlife , etc. The two trends are converging .
The Ecotourism Or travel to protect the ecosystem . Therefore, ecotourism is a means rather than an ordinary tour .
But it does include a tour to the conservation movements.
        Ecotourism has 3 main elements is to create awareness about the conservation of nature and environment.
The natural environment is a fundamental factor of the old nature . If nature and ecosystems are affected by the exploitation in any form .
Opportunities and wildlife habitat is degraded or destroyed , it is high . The knowledge or awareness of tourists and visitors it is important .
        The second element is the satisfaction of tourists. Which are directly related to the first element . Because tourists often as eco- tourists
who have no desire or interest to learn about nature in different ways and the natural landscape . The nature difficult to travel with.
        The third element is the involvement of local communities. The tour has a central role to economic and social development
of local communities in the long term than other events open to the local community participation in ecotourism in various forms to
help the affected communities . benefits from tourism , both directly and indirectly. Form of participation of the community are Investment on facilities,
small low environmental impact . The Guide Handicraft goods are sold to tourists. And Employment in the other services and so on.
        Ecotourism is Differs from traditional tourism , ie tourism in scope in determining the profound and important to the conservation area.
This can be determined by four factors .
            1. To develop awareness and understanding of tourists to do their best for the environment and the economy.
            2. To enhance the experience , quality and high-value to the tourist or visitor attraction .
            3. To improve the quality of life in communities where tourism is located .
            4. To maintain and preserve the environmental quality of the city .
            It also aims to promote tourism -related livelihoods are in the interest of the local Aboriginal community .

Choosing a helmet And how to correct .

Choosing a helmet And how to correct .

Warning No hat can protect the wearer from impact at high speed or low speed , however, for maximum protection,
you should choose a helmet that fits your head and fasten the chin strap must be tight at all times.
If the cap does not fit on the head And do chin strap or chin strap loose. Hats off to make it as an accident.
Which caused serious injuries to his head.
Before you buy a hat Should Repeat steps 1 through 4 below .
1. Choose a hat that fits .
     Measure the widest part of the head . Take a tape measure wrapped around the head just above
the eyebrows by the call is about 1 inch ( 2.5 cm) in a hat with a size comparable to the width of the band
of your measured. Due to the size of your head as a hat can not be bought or measured width .
It is between two hat sizes , let him try to wear a hat with a small first .
2. Try wearing a hat
     Pull the chin strap and two to the side and wearing a hat. Do not remove the cover calls it may be absent .
If the cap is not tight Hat is too big for you . If you are not familiar with the hat. You may be sure to put the cap on tightly.
Although difficult to But for your safety We recommend wearing the smallest size possible .
You will feel the cap is attached to your head . And non -slip accidents.
3. Check the fit when wearing it. Check the following things to decide what hat size is right for you .
     3.1 Ensure that the fabric lining in the hat is going to feel attached to your head .
     3.2 Make sure the cloth in pieces on the head close to your head .
     3.3 examine the lining of the cheek with your cheek .
     3.4 Ensure that there are no gaps between the forehead with his deputy in the hat , you can insert a finger into it.
     3.5 Now remove the handle cap, both face to face and shake it left and right. You will feel that your skin and
hair pulled while you move the hat . If the cap can be moved around. Is easy to show that that hat .
Too big for you You try a smaller cap .
4. Check the chin strap
     4.1 Fasten the chin tightly as possible without pain .
     4.2 When a chin strap then leaned back and tried to pull the helmet off by rotating the cap to come forward.
     4.3 later put his hand over his forehead , front cap . ( Or catch the chin ) and then try to pull the helmet off by rotating the rear .
    4.4 If the cap off that way. Do not use that hat It may be that the hat is too big . Or the chin strap was not tight enough .

*** Repeat the process until you have a helmet that fits your head . The chin strap tight fit . ***